| 7225
|
 |
| Gold Tip Weight System |
| Front of Center (FOC) balance point is a very important factor in determining the accuracy of your arrows. Adding weight to the point end of the shaft will increase overall arrow weight and alter dynamic spine. |
|
|
|
|
|
|
|
|
|
|
| 7228
|
 |
| Gold Tip Weight System Adjustment Wrench |
| This tool allows you to add or remove GoldTip Weights from your points or inserts after they are glued into the shaft. Simply pull the nock or pin bushing out of your arrow and use our weight wrench to add or subtract weight. |
|
|
|
|
|
|
|
|
|
|
| 7230
|
 |
| GoldTip Accu-Tough .204 Insert |
| Designed to fit .204 Inside diameter shafts, the Accu-Tough insert brings together top quality materials and engineering to produce a consistent and accurate insert that lives up to it's name! |
|
|
|
|
|
|
|
|
|
|
| 4406
|
 |
| Steel Broadhead Adapters (Screw-In) |
| NEW! Steel Broadhead Adapters
Made of thick-walled premium steel for unmatched strength behind your broadheads and available in weights of 75,100 and 125 grains to instantly adjust your FOC (forward of center) and increase your arrow penetration. |
|
|
|
|
|
|
|
|
|
|
| 1071
|
 |
| Aluminum Broadhead Screw-In Adapters |
| These broadhead adapters are made so you can use 5 degree taper glue on broadheads and points. Short adapters to be used with broadheads with removable bleeder blades. |
|
|
|
|
|
|
|
|
|
|
| 4883
|
 |
| Heavy Hunter 100gr Stainless Steel Inserts |
| Extra long 100 gr. Stainless Steel inserts for new Gold Tip Heavy Hunter shafts.
Each insert is tapped on the backside for the mounting of screw-in Gold Tip weight system weights.
Available in Dozen and 100 packs. |
|
|
|
|
|
|
|
|
|
|
| 4882
|
 |
|
|
| 7229
|
 |
| GoldTip Heavy Inserts 50 & 100 grain |
| GoldTip has designed extra long 100 grain brass and 50 grain aluminum inserts for Gold Tip shafts or any carbon shaft with .246" inside diameter. |
|
|
|
|
|
|
|
|
|
|
| 3170
|
 |
| Brass Converta Point Inserts |
| Replaces standard inserts, increases FOC for more stability. Great for adding weight or adjusting spine on carbon arrows. |
|
|
|
|
|
|
|
|
|
|
| 9010
|
 |
|
|
| 9003K
|
 |
| Easton Hit Insert Kit Hit |
| Kit comes with ONE DOZEN inserts/15 grains each, chamfer stone, Installation tool, a pack of 24 hour epoxy and instructions. |
|
|
|
|
|
|
|
|
|
|
| 6040
|
 |
|
|
| ACPI
|
 |
|
|
| 4420
|
 |
| Insert Weights |
| Accurate weights stack inside the shaft while being screwed into the insert. Great for adding weight or adjusting spine on carbon and aluminum arrows. Sold by the dozen. |
|
|
|
|
|
|
|
|
|
|
| A1093
|
 |
| Broadhead Adapter (Glue-In) |
| These adapters are made to glue into carbon and aluminum shafts so you can use 5 degree taper glue on broadheads and points. |
|
|
|
|
|
|
|
|
|
|
| TNI-VA
|
 |
|
|
| 5603
|
 |
| Woodyweights |
| "Woodyweights" are used to add extra point weight and increase the "FOC" on your wood arrows. |
|
|
|
|
|
|
|
|
|
|
| 4430
|
 |
|
|
